Cobra Electronics microTALK 600 - Manual (Page 10)

DCS Privacy Code Scan
You can automatically scan the DCS privacy codes (01 to 83) within one channel.
NOTE: The radio must be in the CTCSS OFF MODE when scrolling through mode functions or DCS
mode will be skipped.
To Scan DCS Privacy Codes:
1. While in the LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the
channel on which you wish to scan the DCS privacy codes.
2. Press the MODE button until the SCAN icon, DCS icon and the small numbers next to the channel
number flash on the display.
3. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning DCS privacy codes within the
channel you selected.
The scan icon will continue to be displayed when DCS privacy code scan is ON. Your radio will continue
to scan DCS privacy codes and stop when an incoming transmission is detected. The radio will remain on that
channel/privacy code for 10 seconds.
While setting DCS privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to LISTENING MODE on
the channel/privacy code that was displayed before you entered more functions.
During Scanning (While Receiving an Incoming Transmission), You Can Choose from the Following:
a. Press and hold the TALK button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and
return to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning DCS privacy codes.
If you press the TALK button while scanning and not within 10 seconds of receiving a transmission, you will transmit on the channel/privacy code
on which you last received a transmission. This will return the radio to LISTENING MODE.
During Scanning (While Not Receiving an Incoming Transmission), You Can Choose from the Following:
a. Press channel/privacy code that was displayed before you entered Mode Functions or channel/privacy code on which, during scanning, you
last received a transmission. This will return the radio to the LISTENING MODE. Press and hold the TALK button to communicate on either
the channel or channel MODE.
b. Press the MODE button to proceed to next available Mode Function.
c. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entererd
Mode Functions or the channel/privacy code on which, during scanning, you last received a transmission.
English MODE FUNCTIONS OPERATION
Select Channel Mode Button
Channel Buttons Select Scan Privacy
Codes