Edge Lighting Marilyn Square - Manual (Page 2)

C
4: Align the backplate center hole with the electrical box. Level
the backplate horizontally and mark the four key holes onto
the wall.
5: Remove the backplate.
BACKPLATE
4
ELECTRICAL
BOX
MOUNTING PLATE
CENTER HOLE
D
6: Tap the anchors onto the marked points up to the threaded
portion with a hammer.
7: Screw in the threaded portion of the anchors with a Phillips
screwdriver.
WALL
6
7
ANCHOR
F
9: Feed the power wires coming from the electrical box
through the backplate center hole.
10: Hang the backplate keyholes onto the exposed screws.
11: Tighten the four #8 screws completely to the secure the
backplate in place.
9
11
10
PHILLIPS SCREW
2
NOTE: It is recommended that one person holds the backplate
while the electrician installs it.
BACKPLATE
E 8: Tighten (not completely) the four #8 screws into the anchors
leaving the head unscrewed for 1/8".
8
PHILLIPS SCREW