Edge Lighting Marilyn Moods RGB - Manual

Installation Instructions for
Marilyn Moods Round RGB
904-MARILYN-04
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
[email protected]
1
MAR-RD-22-RGB-CH
© 2014 Edge Lighting. All Rights Reserved.
A 1: Remove the two Phillips screws from the sides of the
backplate.
2: Carefully lift the mirror.
SAVE THESE INSTRUCTIONS!
- This product is wall mounted only.
- This instruction shows a typical installation
- The RGB LEDs are controlled by a wireless controller
(included) for light intensity, show & color modes.
IMPORTANT INFORMATION
BACKPLATE
1
MIRROR
PHILLIPS SCREW
Install the Backplate
1
B
3: Align the backplate center hole with the electrical box. Level
the backplate horizontally and mark the four key holes onto
the wall.
4: Remove the backplate.
BACKPLATE ELECTRICAL
BOX
BACKPLATE
CENTER HOLE
NOTE: It is recommended that one person holds the backplate
while the electrician installs it.
3
3
3
3