Chauvet Marine Lighting - Manual (Page 9)

4. Operating Instructions
9 11/10/2010 3:19 PM
Standalone
This fixture has preprogrammed operating modes. These are accessed via the DIP switches on
the back of the fixture.
DIP switch [10] must be OFF in this mode.
Please see the chart below for further explanation.
Mode
Water effect rotating, color rotating
Water effect static, color rotating
Water effect rotating, color static
Water effect static, color static
DIP switches
1 = ON
2 = ON
3 = ON
4 = ON
The DIP switches will not work together. Only use one out of the 4 modes listed above!
If you desire a specific static color, such as yellow, then switch the unit into a mode where
the color wheel is moving. When the color wheel rotates to the desired color, switch the
fixture into a mode that does NOT have the color wheel moving. (DIP switch [1] or [2])
DMX Channel Values
C HANNEL V ALUE F UNCTION
1
000 Ù 255
Dimmer
0%~100%
2
000 Щ 063
064 Щ 127
128 Щ 191
192 Щ 255
Control
Water effect rotating, color rotating
Water effect static, color rotating
Water effect rotating, color static
Water effect static, color static