Control, Sport program, re, Driving stability control systems – BMW 550i xDrive Gran Turismo 2010 User Manual

Page 104

Advertising
background image

Stabilizing interventions by the Integral Active
Steering* system are only performed by the rear
axle steering.
To increase vehicle stability, activate DSC again
as soon as possible.

Activating DSC OFF

Press and hold the button, but not lon‐
ger than approx. 10 seconds, until the

indicator lamp for the DSC lights up in the in‐
strument cluster and DSC OFF is displayed in
the tachometer.
The DSC system is switched off.

Deactivating DSC OFF

Press the button.
DSC OFF and the DSC indicator lamp

go out.

Indicator/warning lamps

When DSC is deactivated, DSC OFF is dis‐
played in the tachometer.

The indicator lamp lights up: DSC is de‐
activated.

TRACTION

Maximum traction on loose road surfaces. DTC
Dynamic Traction Control is switched on. Driv‐
ing stability is limited during acceleration and
when driving in bends.

Activating TRACTION

Press the button.
TRACTION is displayed in the tachom‐

eter.
The DSC indicator lamp in the instrument clus‐
ter lights up.

Deactivating TRACTION

Press the button again.
TRACTION and the DSC indicator lamp

go out.

Indicator/warning lamps

When DTC is activated, TRACTION is displayed
in the tachometer.

The indicator lamp lights up: DTC Dy‐
namic Traction Control is activated.

SPORT+

Sporty driving with optimized chassis and sus‐
pension during limited driving stabilization.
Dynamic Traction Control is switched on.
The driver handles several of the stabilization
tasks.

Activating SPORT+

Press the button repeatedly until
SPORT+ appears in the tachometer

and the DSC indicator lamp lights up in the in‐
strument cluster.

Indicator/warning lamps

SPORT+ is displayed in the tachometer.

The indicator lamp lights up: DTC Dy‐
namic Traction Control is activated.

SPORT

Consistently sporty tuning of the suspension for
greater driving agility with maximum driving sta‐
bilization.
The program can be configured to individual
specifications.
The configuration is stored for the remote con‐
trol currently in use.

Activating SPORT

Press the button repeatedly until
SPORT+ appears in the tachometer.

Configuring SPORT

When the

display is activated on the Control

Display, refer to page 105,

the sport program

can be set to individual specifications.

Seite 104

104

Online Edition for Part no. 01 41 2 604 413 - 03 10 500

Driving stability control systems

Advertising
This manual is related to the following products: