Using stability control, Stability control – FORD 2015 F-150 User Manual

Page 202

Advertising
background image

USING STABILITY CONTROL

AdvanceTrac™ with Roll Stability
Control™ (RSC™)

The system automatically activates when
you start your engine. You can switch off
the electronic stability control and roll

stability control portions of the system
below 35 mph (56 km/h). When the
transmission is in reverse (R), they are
disabled. You can switch off the traction
control portion of the system
independently. See Using Traction
Control (page 197).

AdvanceTrac with RSC Features

Traction

control system

Electronic

stability

control

Roll stability

control

Stability

control OFF

light

Button func-

tions

Enabled

Enabled

Enabled

Illuminated
during bulb

check

Default at start-

up

Disabled

Enabled

Enabled

Illuminated

Button pressed

momentarily

Disabled

Disabled

Enabled

Illuminated

Button pressed

and held for

more than 5

seconds at

vehicle speed

under 35 mph

(56 km/h)

Enable with

higher threshold

target

Enabled with

higher threshold

target

Enabled

Illuminated

Vehicle speed

exceeds 35 mph
(56 km/h) after

button is

pressed and

held for more

than 5 seconds

Enabled with

higher threshold

target

Enabled with

higher threshold

target

Enabled

Illuminated

Double press

Enabled

Enabled

Enabled

Not illuminated

Button pressed

again after

deactivation

Disabled

Disabled

Disabled

Illuminated

Transfer case

switched to

4WD Low

Locked

199

F-150 (), enUSA, First Printing

Stability Control

Advertising