Technical specifications, Technical specifications - 1.0l, Ecoboost – FORD 2015 Fiesta User Manual

Page 203: Maintenance, Technical specifications - 1.0l ecoboost

Advertising
background image

Vehicles with 1.6L Duratec-16V Engine

E156924

1.

Remove the retaining screws that
secure the air filter housing cover.

2. Carefully lift the air filter housing cover.

3. Remove the air filter element from the

air filter housing.

4. Wipe any dirt or debris from the air filter

housing and cover to make sure no dirt
gets in the engine and to make sure you
have a good seal.

5. Install a new air filter element. Be

careful not to crimp the filter element
edges between the air filter housing
and cover. This could cause filter
damage and allow unfiltered air to
enter the engine if not correctly seated.

6. Install the air filter housing cover.
7.

Install the retaining screws to secure
the air filter housing cover to the air
filter housing.

TECHNICAL SPECIFICATIONS - 1.0L ECOBOOST™

Capacities

Capacity

Item

4.3 qt (4.1 L)

Engine lubrication system – including the oil filter

4.0 qt (3.8 L)

Engine lubrication system – excluding the oil filter

0.8 qt (0.75 L)

Engine oil top-up – raise the level on the dipstick
from minimum to maximum

6.1 qt (5.8 L)

Engine cooling system

12.4 gal (47 L)

Fuel tank

Between MIN/MAX on brake fluid

reservoir

Brake fluid

1.8 qt (1.7 L)

Manual transmission

2.6 qt (2.5 L)

Windshield and rear window washer system -
including headlamp washer

24 oz (0.68 kg)

A/C refrigerant

4.2 fl oz (125 ml)

A/C refrigerant compressor oil

200

Fiesta (CCT), enUSA, Second Printing

Maintenance

Advertising