FORD 2015 Fusion Hybrid - Manual (Page 94)

Grade Assist
(If Equipped)
E144523
Lights when you switch on the
grade assist function.
Heads Up Display
(If Equipped)
E156133
A red beam of lights appears on
the windshield in certain
instances when using adaptive
cruise control or the collision warning
system. To make sure the display works,
it will also appear momentarily when you
start your vehicle .
High Beam
Lights when you switch on the
high-beam headlamps. Flashes
when you use the headlamp
flasher.
Hood Ajar
E159324
Lights when the ignition is on and
the hood is not completely
closed.
Lane Keeping Aid
(If Equipped)
E144813
Lights when you activate the
lane keeping system.
Low Fuel Level
Lights when the fuel level is low
or the fuel tank is nearly empty.
Refuel as soon as possible.
Low Tire Pressure Warning
Lights when your tire pressure is
low. If the lamp remains on with
the engine running or when
driving, check your tire pressure
as soon as possible.
To confirm the lamp is working, it will also
light momentarily when you switch on the
ignition. If it does not light when you switch
on the ignition, or it begins to flash at any
time, have an authorized dealer check the
system.
Parking Lamps
Lights when you switch on the
parking lamps.
Powertrain Fault
Lights when your vehicle detects
a powertrain fault. Contact an
authorized dealer as soon as
possible.
Note: If your vehicle detects certain faults,
it will not allow you to operate the
accelerator pedal. If this happens, press the
brake pedal and release it. This will activate
limp home vehicle operation. In limp home
vehicle operation, your vehicle will
accelerate in a controlled manner up to a
maximum speed of 35 mph (56 km/h) on
a flat surface. If you apply the brake pedal
or move the transmission to neutral (N) you
can override your vehicle’s acceleration.
Ready to Drive
E144692
Lights when you have switched
on the vehicle and it is ready to
drive. A corresponding message
may appear stating ready to drive.
91
Fusion/Mondeo (CC7), enUSA
Instrument Cluster