FORD 2015 Transit v.2 - Manual (Page 219)

Note: To see a clearer light pattern while
adjusting one headlamp, you may want to
block the light from the other headlamp.
3. Switch on the low beam headlamps
and open the hood.
E142465
4. On the wall or screen you will observe
a flat zone of high intensity light
located at the top of the beam pattern.
If the top edge of the flat zone of high
intensity light is not on the horizontal
reference line, adjust the aim of the
headlamp beam.
E164485
5. Locate the vertical adjuster on each
headlamp. Use a suitable tool, for
example a screwdriver or hexagonal
socket, to turn the adjuster clockwise
or counterclockwise to adjust the
vertical aim of the headlamp. The
horizontal edge of the brighter light
should touch the horizontal reference
line.
6. Close the hood and switch off the
lamps.
Horizontal Aim Adjustment
The horizontal aim of the headlamp beam
on your vehicle is not adjustable.
REMOVING A HEADLAMP
WARNING
Switch all of the lamps and the
ignition off. Failure to follow this
warning could result in serious
personal injury.
1. Open the hood. See Opening and
Closing the Hood (page 200).
E169198
2
2. Remove the screws.
216
Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing
Maintenance