Myford touch – FORD 2014 F-150 Raptor v.3 User Manual

Page 371

Advertising
background image

Only the photograph(s), which meets the
following conditions, display:

Compatible file formats are as follows:
.jpg, .gif, .png, .bmp

Each file must be 1.5 MB or less.

Recommended dimensions: 800 x 384

Sound

E142607

Press the Settings icon > Sound,
then select from the following:

Sound

Bass

Midrange

Treble

Set Balance and Fade

DSP

*

Occupancy Mode

*

Speed Compensated Volume

*

Your vehicle may not have these sound

settings.

Vehicle

E142607

Press the Settings icon >
Vehicle, then select from the
following:

Vehicle Health Report

Rear View Camera

Enable Valet Mode.

Vehicle Health Report

Turn Automatic Reminders on and off
and set the mileage interval at which you
would like to receive the reports. Press ?
for more information on these selections.

When done making your selections, press
Run Vehicle Health Report Now if you
want your report.

You can find more information on Vehicle
Health Report in this chapter. See
Information (page 399).

Rear View Camera

This menu allows you to access settings
for your rear view camera.

E142607

Press the Settings icon >
Vehicle > Rear View Camera,
then select from the following

settings:

Rear Camera Delay

Visual Park Aid Alert

Guidelines.

You can find more information on the rear
view camera in another chapter. See Rear
View Camera (page 173).

Enable Valet Mode

Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
You can create your own four-digit PIN to
lock and unlock the system.

E142607

1.

Press the Settings icon > Vehicle >
Enable Valet Mode.

2. When prompted, enter a four-digit PIN.

After you press Continue, the system locks
until you enter the PIN again.

Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.

368

F150 (TF6) , enUSA

MyFord Touch™

(If Equipped)

Advertising
This manual is related to the following products: