Creating a mykey, Mykey – FORD 2014 Fiesta v.1 User Manual

Page 52

Advertising
background image

Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Also, speed
sensitive compensated (automatic
volume control) feature will be
disabled.

Always on setting. When this is
selected you will not be able to disable
Advance Trac, Emergency Assist or the
do not disturb feature (if your vehicle
is equipped with these features).

CREATING A MYKEY

Use the information display to create a
MyKey:

E162402

1.

Insert the key you want to program into
the ignition or, if the vehicle has push
button start, hold the intelligent access
key next to the steering column exactly
as shown.

2. Switch the ignition on.
3. Access the main menu on the

information display controls and select
Settings, then MyKey by pressing OK
or the right arrow button.

4. Press OK to select Create MyKey.

5. When prompted, hold the OK button

until you see a message informing you
to label this key as a MyKey. The key
will be restricted at the next start.

MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.

You can program optional settings for the
key(s). Refer to Programming or
Changing Optional Settings.

All MyKeys can be cleared within the same
key cycle in which a MyKey was created,
otherwise an admin key is required to clear
the keys. See Clearing All MyKeys (page
50).

Programming or Changing
Optional Settings

Use the information display to access your
optional MyKey settings.

1.

Switch the ignition on using an admin
key. If the vehicle has push button start,
hold an intelligent access admin key
next to the steering column exactly as
shown and switch the ignition on.

2. Access the main menu and select

Settings, then MyKey.

3. Use the arrow buttons to get to an

optional feature.

4. Press OK or the right arrow button to

scroll through settings.

5. Press OK or the right arrow button to

make a selection.

Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created them with either the
MyKey or an admin key. Once you have
switched the engine off, you will need an
admin key to change or clear your MyKey
settings.

49

Fiesta (CCT)

MyKey™

(If Equipped)

Advertising