Keys and remote controls – FORD 2014 Fiesta v.2 User Manual
Page 48
Vehicles Without Intelligent Access
1
E126152
1.
Insert a screwdriver into the recess on
the back of the key and remove the key
blade.
E126153
2
2. Release the retaining clips with the
screwdriver and separate the two
halves of the remote control.
E126281
3
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
3. Carefully pry out the battery with the
screwdriver.
4. Install a new battery (3V CR 2032) with
the + facing upward.
5. Assemble the two halves of the remote
control.
6. Install the key blade.
Integrated Keyhead Transmitter
E138619
1.
Twist a thin coin in the slot of the
transmitter near the key ring to remove
the battery cover.
2. Remove the old battery.
45
Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013
Keys and Remote Controls