Using the front and rear sensing system, Rear sensing system, 176 parking aids – FORD 2014 Focus v.2 User Manual

Page 177

Advertising
background image

Using the Front and Rear Sensing System

Rear Sensing System

The rear sensors are only active when the transmission is in R (Reverse).
As the vehicle moves closer to the obstacle, the rate of the audible
warning increases. When the obstacle is fewer than 12 inches (30
centimeters) away, the warning sounds continuously. If a stationary or
receding object is detected farther than 12 inches (30 centimeters) from
the side of the vehicle, the tone sounds for only three seconds. Once the
system detects an object approaching, the warning sounds again.

A. Coverage area of up to 6 feet
(2 meters) from the rear bumper
(with a decreased coverage area at
the outer corners of the bumper).

The system detects certain objects while the transmission is in R
(Reverse):
• and moving toward a stationary object at a speed of 3 mph (5 km/h)

or less but not moving,

• and a moving object is approaching the rear of the vehicle at a speed

of 3 mph (5 km/h) or less

The system can be turned off using the information display control.
Refer to the Information Display chapter. If a fault is present in the
system, a warning message appears in the information display and does
not allow the driver to switch the faulted system on.

A

176

Parking Aids

2014 Focus (foc)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)

Advertising