FORD 2014 Fusion v.3 - Manual (Page 296)

Ford part number /
Ford specification
Ford part name or
equivalent
Capacity Item
WSH-M1C231-A
1 Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Brake Fluid, or
equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid
may cause degraded brake performance and not meet the Ford performance standards.
Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or
other materials may result in brake system damage and possible failure.
2 Approximate dry fill capacity. Actual amount may vary during fluid changes.
3 Automatic transmissions that require Motorcraft MERCON LV transmission fluid should
only use Motorcraft MERCON LV transmission fluid.
Use of any fluid other than the recommended fluid may cause transmission damage.
Change the automatic transmission fluid and filter at the correct service interval. See
Scheduled Maintenance (page 428).
4 See your authorized dealer for fluid level checking or filling.
5 Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet
Ford's oil specification. It is also acceptable to use an engine oil of recommended viscosity
grade that meets API SN requirements and displays the API certification mark for gasoline
engines.
6 Do not use oils labeled as API SN unless the label also displays the API certification mark.
These oils do not meet the requirements of your vehicle's engine and emissions system.
7 Do not use supplemental engine oil additives in your engine. They are unnecessary and
could lead to engine damage not covered by your Ford warranty.
8 Add the coolant type originally equipped in your vehicle.
9 See the Warning below:
WARNING
The air conditioning refrigerant system contains refrigerant R-134a under high
pressure. Opening the air conditioning refrigerant system can cause personal injury.
Have the air conditioning refrigerant system serviced only by qualified personnel.
293
Fusion (CC7) , enUSA
Capacities and Specifications