Pairing subsequent phones, Phone voice commands, Sync® 331 – FORD 2014 Mustang v.3 User Manual

Page 332

Advertising
background image

Depending on your phone’s capability and your market, the system may
prompt you with questions such as setting the current phone as the
primary phone (the phone SYNC automatically tries to connect with first
upon vehicle start-up), downloading your phone book, etc.

Pairing Subsequent Phones

Note: Make sure the vehicle ignition and radio are turned on and the
transmission is in position P (vehicles equipped with an automatic
transmission) or 1st gear (vehicles equipped with a manual
transmission).

Note: SYNC can store up to 12 previously paired phones.
1. Press the PHONE hard button; select the Settings tab, then Add.
2. When prompted on your phone’s display, enter the six-digit PIN

provided by SYNC in the radio display. The display indicates when
the pairing is successful.

3. The system then prompts with questions such as if you would like to

set the current phone as the primary phone (the phone SYNC
automatically tries to connect with first upon vehicle start-up),
download your phone book, etc.

Phone Voice Commands

Press the voice button and say any of the following:

“PHONE”

“Call <name>”

“Call <name> at home”

“Call <name> at work” OR “Call <name> in office”

“Call <name> on other”

“Call <name> on mobile OR cell”

“Dial”

*

*

If you have said “Dial”, see the “Dial” table below.

“DIAL”

“411” (four-one-one), “911” (nine-one-one), etc.

“700 (seven hundred)” (seven hundred)

“800 (eight hundred)” (eight hundred)

“900 (nine hundred)” (nine hundred)

“#” (pound)

SYNC®

331

2014 05+ Mustang (197)
Owners Guide gf, 3rd Printing, January 2014
USA
(fus)

Advertising