FORD 2014 Taurus v.3 - Manual (Page 149)

Recalling a memory position with the remote control
The memory positions are also recalled when you press unlock on your
remote control (if the transmitter is programmed to a memory position)
or, when you enter a valid personal entry code that is programmed to a
memory position. If you enable the easy entry feature, the seat will first
move to the easy entry position. The seat will move to the final position
when the key is in the ignition or when the push button start system is
put in accessory mode or started.
To program the memory feature to a remote control, see the Keys and
remote control chapter.
Easy Entry and Exit Feature (If Equipped)
This feature can move the seat rearward and the optional steering
column up and forward to allow extra room to exit the vehicle.
This occurs when:
• You place the transmission in neutral (N) or park (P), and
• You switch the ignition off.
The seat and steering wheel will move to their original positions when:
• You place the transmission in neutral (N) or park (P), and
• You switch the ignition on.
Turn the Easy Entry/Exit feature on or off through the information
display settings menu. See the Information Displays chapter.
HEATED SEATS (IF EQUIPPED)
WARNING: Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes, spinal cord
injury, medication, alcohol use, exhaustion, or other physical conditions,
must exercise care when using the seat heater. The seat heater may
cause burns even at low temperatures, especially if used for long
periods of time. Do not place anything on the seat that insulates against
heat, such as a blanket or cushion, because this may cause the seat
heater to overheat. Do not puncture the seat with pins, needles, or
other pointed objects because this may damage the heating element
which may cause the seat heater to overheat. An overheated seat may
cause serious personal injury.
148 Seats
2014 Taurus
Owners Guide gf, 3rd Printing, January 2014
USA (fus)