Changing the air filter element, Adjusting the headlamps, Vertical aim adjustment – FORD 2013 Edge v.4 User Manual

Page 302: Maintenance 301

Advertising
background image

Changing the air filter element

1. Release the clamps that secure the air
filter housing cover.

2. Carefully separate the two halves of the
air filter housing.

3. Remove the air filter element from the
air filter housing.

4. Wipe the air filter housing and cover
clean to remove any dirt or debris and to
ensure good sealing.

5. Install a new air filter element. Be careful not to crimp the filter
element edges between the air filter housing and cover. This could cause
filter damage and allow unfiltered air to enter the engine if not properly
seated.

6. Replace the air filter housing cover and secure
the clamps. Be sure that the air cleaner cover tabs
are engaged into the slots of the air cleaner housing.

ADJUSTING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident, an authorized dealer should
check the alignment of your headlamps.

Vertical Aim Adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.

Maintenance

301

2013 Edge (edg)
Owners Guide gf, 4th Printing, November 2012
USA
(fus)

Advertising