Easy entry and exit feature (if equipped), Heated seats (if equipped), Heated seats – FORD 2013 Flex v.3 User Manual

Page 165: 164 seats

Advertising
background image

Easy Entry and Exit Feature (If Equipped)

This feature automatically moves the driver’s seat rearward 2 inches (5
centimeters) when:
• the transmission is in position N or P
• the key is removed from the ignition or the push button start system

(if equipped) is switched off.

The seat will move to the original position when:
• the transmission is in position N or P
• the key is placed in the ignition or when the push button start system

(if equipped) is put in accessory mode or started.

The easy entry feature can be turned off or on through the information
display.

HEATED SEATS (IF EQUIPPED)

WARNING: Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes, spinal cord

injury, medication, alcohol use, exhaustion, or other physical conditions,
must exercise care when using the seat heater. The seat heater may
cause burns even at low temperatures, especially if used for long
periods of time. Do not place anything on the seat that insulates against
heat, such as a blanket or cushion, because this may cause the seat
heater to overheat. Do not puncture the seat with pins, needles, or
other pointed objects because this may damage the heating element
which may cause the seat heater to overheat. An overheated seat may
cause serious personal injury.

The heated seats will only function when the ignition is in the on
position.

Note: Do not do the following:
• Place heavy objects on the seat
• Operate the seat heater if water or any other liquid is spilled on the

seat. Allow the seat to dry thoroughly.

164

Seats

2013 Flex (471)
Owners Guide gf, 3rd Printing, December 2012
USA
(fus)

Advertising