Locks – FORD 2013 Fusion Hybrid v.2 User Manual

Page 59

Advertising
background image

E138637

You can use the keypad to:

lock or unlock the doors

release the trunk

recall memory seat and mirror
positions (if equipped)

program and erase user codes

arm and disarm the anti-theft alarm.

You can operate the keypad with the
factory-set 5-digit entry code. The code is
located on the owner’s wallet card in the
glove box and is available from an
authorized dealer. You can also create up
to five of your own 5-digit personal entry
codes.

Programming a Personal Entry Code

To create your own personal entry code:

1.

Enter the factory-set code.

2. Press 1·2 on the keypad within five

seconds.

3. Enter your personal 5-digit code. You

must enter each number within five
seconds of each other.

4. Press 1·2 on the keypad to save

personal code 1.

The doors will lock then unlock to confirm
that programming was successful.

To program additional personal entry
codes, repeat Steps 1-3, then for Step 4:

press 3·4 to save personal code 2

press 5·6 to save personal code 3

press 7·8 to save personal code 4

press 9·0 to save personal code 5.

You may also program a personal entry
code through the MyFord Touch system
(if equipped). See Settings (page 358).

Tips:

Do not set a code that uses five of the
same number.

Do not use five numbers in sequential
order.

The factory-set code will work even if
you have set your own personal code.

Recalling Memory Positions (If
Equipped)

The programmed entry codes will recall
driver memory positions as follows:

Entry code 1 will recall driver 1 memory
positions.

Entry code 2 will recall driver 2 memory
positions.

Entry code 3 will recall driver 3 memory
positions.

Note: Personal entry codes 4 and 5 will not
recall memory positions.

Erasing a Personal Code

1.

Enter the factory-set 5-digit code.

2. Press and release 1·2 on the keypad

within five seconds.

3. Press and hold 1·2 for two seconds.

You must do this within five seconds
of completing Step 2.

All personal codes are now erased and only
the factory-set 5–digit code will work.

56

Locks

Advertising