FORD 2013 Mustang v.2 - Manual (Page 171)

PRINCIPLES OF OPERATION
The traction control system helps avoid drive wheel spin and loss of
traction.
If your vehicle begins to slide, the system applies the brakes to individual
wheels and, when needed, reduces engine power at the same time. If the
wheels spin when accelerating on slippery or loose surfaces, the system
reduces engine power in order to increase traction.
USING TRACTION CONTROL
In certain situations (e.g. stuck in snow or mud), turning the
traction control off may be beneficial as this allows the wheels
to spin with full engine power. Turn off the traction control
system by pressing the stability control button located on the
center console.
System indicator lights and messages
WARNING: If a failure has been detected within the
AdvanceTrac
௡ system, the stability control light and the stability
control off light will illuminate steadily. Verify that the traction control
system was not manually disabled through the information display . If
the stability control light still illuminates steadily, have the system
serviced by an authorized dealer immediately. Operating your vehicle
with AdvanceTrac
௡ disabled could lead to an increased risk of loss of
vehicle control, vehicle rollover, personal injury and death.
The stability control light temporarily illuminates on engine
start-up and flashes when a driving condition activates the
stability system.
The stability control off light temporarily illuminates on engine
start-up and stays on when the system is in sport mode, the
traction control system is turned off, or AdvanceTrac
௡ is turned
off.
When the traction control system is turned off or on, a message appears
in the information display showing system status.
OFF
Traction Control 171
2013 05+ Mustang (197)
Owners Guide gf, 2nd Printing
USA (fus)