Positive retention floor mat (if equipped), Driver controls – FORD 2012 E-450 User Manual

Page 73

Advertising
background image

They are coded as follows:

Switch

Circuit number

Wire color

Fuse

AUX 1

CAC05

Yellow

30A

AUX 2

CAC06

Green with
Brown Trace

30A

AUX 3

CAC07

Violet with
Green Trace

10A

AUX 4

CAC08

Brown

15A

More detailed information about Upfitter switches can be found at
https://www.fleet.ford.com/truckbbas/.

POSITIVE RETENTION FLOOR MAT (IF EQUIPPED)

WARNING: Always use floor mats that are designed to fit the
foot well of your vehicle. Only use floor mats that leave the pedal

area unobstructed. Only use floor mats that are firmly secured to
retention posts so that they cannot slip out of position and interfere
with the pedals or impair safe operation of your vehicle in other ways.
• Pedals that cannot move freely can cause loss of vehicle control and

increase the risk of serious personal injury.

• Always make sure that the floor mats are properly attached to the

retention posts in the carpet that are supplied with your vehicle.
Floor mats must be properly secured to both retention posts to
ensure mats do not shift out of position.

• Never place floor mats or any other covering in the vehicle foot well

that cannot be properly secured to prevent them from moving and
interfering with the pedals or the ability to control the vehicle.

Driver Controls

73

2012 Econoline (eco)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: