Settings/vehicle settings, Instrument cluster – FORD 2012 Edge User Manual
Page 32
For more information refer to Essentials of good fuel economy in the
Maintenance and Specifications chapter.
Settings/Vehicle Settings
In this mode, you can configure different driver setting choices. Press
the right arrow key (when in the Settings menu) to reach the listed
modes below:
Note: Some items are optional and may not appear.
Driver Assist
Traction Control
On (default setting) / Off
Blind Spot
On (default on key cycle) / Off
Collision Warning Sensitivity
High / Normal / Low
Chimes
On (default on key cycle) / Off
Warn
On (default on key cycle) / Off
Cross Traffic
On (default on key cycle) / Off
Cruise Control
Adaptive or Normal
Rear Park Aid
On (default on key cycle) / Off
Trailer Sway
On (default on key cycle) / Off
Vehicle
Autolamp Delay
Off, 10 / 20 (default setting) / 30 / 60 / 90 / 120 /
180 seconds
Easy Entry/Exit
On / Off
Fuel
DTE Calculation
Normal, Towing
Locks
Autolock,
On / Off
Autounlock
On / Off
Remote
Unlocking
All doors / Driver’s door
Menu Control
Standard / Memory On
Oil Life Reset
Set to XXX %
Power Liftgate
Enable / Disable
Instrument Cluster
32
2012 Edge (edg)
Owners Guide, 1st Printing
USA (fus)