Compass calibration adjustment, Center console, Driver controls – FORD 2012 Escape v.1 User Manual

Page 69

Advertising
background image

6. The direction will display after
the RESET control is released. The
zone is now updated.

Compass calibration adjustment

Perform compass calibration in an open area free from steel structures
and high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.

1. Start the vehicle.

2. To calibrate, press and hold the
RESET control for approximately
ten seconds until CAL appears.
Release the control.

3. Slowly drive the vehicle in a
circle (less than 3 mph [5 km/h]) until the CAL display changes to the
direction value. It may take up to five circles to complete calibration.

4. The compass is now calibrated.

CENTER CONSOLE
Your vehicle is equipped with a variety of console features. These include:
1. Cupholders
2. Utility compartment console lid has
a CD holder, a business card holder
and two pen holders. The utility
compartment has a removable bin
with coin holder slots, a sliding tray, a
cell phone holder and CD holders.
3. Rear power point
4. Rear cupholders
5. Small storage trays and (if
equipped) an ambient light control
switch.

Driver Controls

69

2012 Escape (204)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: