Power liftgate (if equipped), Driver controls – FORD 2012 Expedition v.1 User Manual

Page 105

Advertising
background image

WARNING (Continued)

• Check attachment of floor mats on a regular basis. Always properly

reinstall and secure floor mats that have been removed for cleaning
or replacement.

• Always make sure that objects cannot fall into the driver foot well

while the vehicle is moving. Objects that are loose can become
trapped under the pedals causing a loss of vehicle control.

• Failure to properly follow floor mat installation or attachment

instructions can potentially cause interference with pedal operation
causing loss of control of vehicle.

• To install floor mats, position the floor mat so that the eyelet is over

the retention post and press down to lock in.

• To remove the floor mat, reverse the installation procedure.

POWER LIFTGATE (IF EQUIPPED)

The liftgate can be operated by the following:
• Instrument panel control button
• Transmitter button
• Outside control button
• Control button in the rear cargo area
Note: The liftgate can be reversed with a second press on a control
button or transmitter and can be manually closed at any time.

Opening and closing the power liftgate:

WARNING: Make sure all persons are clear of the power liftgate
area before using the power liftgate control.

WARNING: Keep keys out of reach of children. Do not allow
children to play near an open or moving power liftgate.

The liftgate will only operate with the vehicle in P (Park). The chime will
beep once if conditions are not correct to start an operation. These
conditions include:
• The ignition is in on and the transmission is not in P (Park)
• The battery voltage is below the minimum operating voltage
• The vehicle speed is at or above 3 mph (5 km/h)

Driver Controls

105

2012 Expedition (exd)
Owners Guide, 1st Printing
USA
(fus)

Advertising