Perimeter alarm system (if equipped), Arming the system, Locks and security – FORD 2012 Explorer v.2 User Manual

Page 151

Advertising
background image

6. Within one minute, press the start/stop button. A message will be
displayed on the message center indicating that the new intelligent
access key was programmed. If four intelligent access keys have already
been programmed to your vehicle, you cannot program anymore and the
message MAX # OF KEYS LEARNED will be displayed on the message
center.

7. Remove the intelligent access key from the center console pocket and
press the

control on the newly programmed intelligent access keys to

exit programming mode.

8. Verify that the remote entry functions operate (press lock then
unlock, making sure you end in unlock) and that the vehicle starts with
new intelligent access key.

If the intelligent access key has been successfully programmed, it can be
used to activate the intelligent access with push button start feature and
can be used to start your vehicle.

Note: To program MyKey

௡ features, refer to MyKey௡ in this chapter.

PERIMETER ALARM SYSTEM (IF EQUIPPED)

The perimeter alarm system will warn you in case of unauthorized entry
to your vehicle.

When the following types of unauthorized entry occur:
• any door, the hood or the liftgate/trunk is opened without using the

keypad, the remote entry transmitter or the intelligent access
transmitter (if equipped),

• or if the ignition is turned on with an invalid key,
the perimeter alarm will flash the turn signal lamps and sound the horn
up to a total of 10 times.

ARMING THE SYSTEM

The system is ready to arm whenever the ignition is off. To arm the
system, do one of the following:
• Press the

control on the remote entry transmitter.

Note: If you press the

control twice on the remote entry

transmitter within three seconds, the horn will chirp once to let you
know that all doors, the hood and the liftgate/trunk are closed. If any
of these are not closed, the horn will chirp twice to warn you that
they are still open.

• Press the driver or passenger interior door lock control

while a

front door is open, then close the door.

Locks and Security

151

2012 Explorer (exp)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: