Replacing fog lamp bulbs, Replacing license plate lamp bulb, Replacing high-mount brake lamp bulb – FORD 2012 Explorer v.2 User Manual

Page 85: Lights

Advertising
background image

Replacing fog lamp bulbs

1. Make sure the headlamp switch is
off.

2. Remove the bulb socket from the
fog lamp by turning it
counterclockwise.

3. Disconnect the electrical
connector.

Reverse steps to reinstall bulb(s).

Replacing license plate lamp bulb

1. Carefully release the spring clip
(1).

2. Remove the lamp (2).

3. Remove the bulb (3).

Reverse steps to reinstall bulb.

Replacing high-mount brake lamp bulb

Your vehicle is equipped with an LED center high-mount stop lamp
located in the spoiler. It is designed to last the life of the vehicle. If
replacement is required, see your authorized dealer.

3

2

1

Lights

85

2012 Explorer (exp)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: