Instrument cluster – FORD 2012 F-550 v.1 User Manual

Page 26

Advertising
background image

OIL LIFE

This displays the remaining oil life.

An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule.

To reset the oil monitoring system to 100% after each oil change,
perform the following:

1. Press and release the SETUP button to display “OIL LIFE XXX%
HOLD RESET = NEW”.

2. Press and hold the RESET button for two seconds and release to reset
the oil life to 100%.

Note: To change oil life 100% value (if equipped with this feature) to
another value, proceed to Step 3.

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the
RESET button to change the oil life start value. Each release and press
will reduce the value by 10%.

UNITS

Displays the current units English or Metric.

Press the RESET button to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

Press the RESET control to select the new autolamp delay values of 0,
10, 20, 30, 60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

Press the RESET control to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

Press RESET to turn it off or on.

COURTESY WIPE

One extra wipe will occur a few seconds after washing the front window
to clear any excess washer fluid remaining on the windshield.

Press RESET to turn this feature on or off.

Instrument Cluster

26

2012 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: