Recycled engine coolant, Coolant refill capacity, Severe climates – FORD 2012 Focus v.3 User Manual

Page 346: Maintenance and specifications

Advertising
background image

If you removed the radiator cap in an overflow system, fill the radiator
until the coolant is visible and radiator is almost full.

6. Replace the cap. Turn until tightly installed. Cap must be tightly
installed to prevent coolant loss.

After any coolant has been added, check the coolant concentration (refer
to Checking engine coolant). If the concentration is not 50/50, drain
some coolant and adjust the concentration. It may take several drains
and additions to obtain a 50/50 coolant concentration.

Whenever coolant has been added, the coolant level in the coolant
reservoir should be checked the next few times you drive the vehicle. If
necessary, add enough 50/50 concentration of engine coolant and
distilled water to bring the liquid level to the proper level.

If you have to add more than 1.0 quart (1.0 liter) of engine coolant per
month, have your authorized dealer check the engine cooling system. Your
cooling system may have a leak. Operating an engine with a low level of
coolant can result in engine overheating and possible engine damage.

Recycled engine coolant

Ford Motor Company does NOT recommend the use of recycled engine
coolant since a Ford-approved recycling process is not yet available.

Used engine coolant should be disposed of in an appropriate

manner. Follow your community’s regulations and standards for recycling
and disposing of automotive fluids.

Coolant refill capacity

To find out how much fluid your vehicle’s cooling system can hold, refer
to Maintenance product specifications and capacities in this chapter.

Fill your engine coolant reservoir as outlined previously in the Adding
engine coolant
section.

Severe climates

If you drive in extremely cold climates:
It may be necessary to increase the coolant concentration

above 50%.

NEVER increase the coolant concentration above 60%.
A coolant concentration of 60% will provide improved freeze

point protection. Increased engine coolant concentrations above
60% will decrease the overheat protection characteristics of the
engine coolant and may cause engine damage.

Maintenance and Specifications

345

2012 Focus (foc)
Owners Guide, 3rd Printing
USA
(fus)

Advertising