FORD 2012 Focus v.5 - Manual (Page 224)

positions, route the tether strap over the top of the head restraint. If
needed, the head restraints can also be removed. See Rear seats in this
chapter.
2. Locate the correct anchor for the
selected seating position.
3. Open the tether anchor cover.
4. Clip the tether strap to the
anchor as shown.
If the tether strap is clipped
incorrectly, the child safety seat may
not be retained properly in the
event of a collision.
5. Tighten the child safety seat
tether strap according to the
manufacturer’s instructions.
If the safety seat is not anchored properly, the risk of a child being
injured in a collision greatly increases.
If your child restraint system is equipped with a tether strap, and the
child restraint manufacturer recommends its use, Ford also recommends
its use.
Seating and Safety Restraints
224
2012 Focus (foc)
Owners Guide, 5th Printing
USA (fus)