Intelligent access key (ia key) (if equipped), Mykey? (if equipped), Locks and security – FORD 2012 Focus v.5 User Manual

Page 153

Advertising
background image

Intelligent Access Key (IA key) (if equipped)

Your vehicle may be equipped with
two intelligent access keys which
operate the power locks and the
remote entry system. You have to
have the IA key in the vehicle to
activate the push button start
system.

The IA key also contains a removable
mechanical key blade that can be used
to unlock the driver door. To release
the mechanical key blade, press the
release buttons on the edge of the
transmitter and remove the key blade.

Your IA keys are programmed to
your vehicle. You cannot enter or
start your vehicle with an
unprogrammed key. If you lose one
or both of your IA keys, replacements are available from your authorized
dealer. For more information on programming replacement IA keys, refer
to the SecuriLock

passive anti-theft system section in this chapter.

Note: Your vehicle’s IA backup keys
were issued with a security tag that
provides important vehicle key cut
information. It is recommended that
you keep the tag in a safe place for
future reference.

MYKEY

(IF EQUIPPED)

The MyKey

௡ feature allows you to program a restricted driving mode to

promote good driving habits. All but one of the keys programmed to the
vehicle can be activated as a MyKey

௡. The key will remain restricted

until MyKey

௡ is cleared. Any remaining keys are referred to as an

“administrator key” or admin key. The admin key can be used to create a
MyKey

௡, program optional MyKey௡ settings, and clear the MyKey௡

feature. When the MyKey

௡ feature is enabled the user can use the

information menu in the message center to see how many MyKeys

௡ and

Locks and Security

153

2012 Focus (foc)
Owners Guide, 5th Printing
USA
(fus)

Advertising
This manual is related to the following products: