Resetting the oil life monitoring system, Maintenance and specifications – FORD 2012 Focus v.5 User Manual

Page 344

Advertising
background image

economy requirements of the International Lubricant Standardization and
Approval Committee (ILSAC), comprised of U.S. and Japanese
automobile manufacturers.

To protect your engine and engine’s warranty, use Motorcraft

௡ SAE

5W-20 or an equivalent SAE 5W-20 oil meeting Ford specification
WSS-M2C945-A. SAE 5W-20 oil provides optimum fuel economy and
durability performance meeting all requirements for your
vehicle’s engine.
Refer to Maintenance product specifications and
capacities
later in this chapter for more information.

Do not use supplemental engine oil additives, cleaners or other engine
treatments. They are unnecessary and could lead to engine damage that
is not covered by Ford warranty.

Change your engine oil and filter according to the appropriate schedule
listed in the scheduled maintenance information.

Ford production and Motorcraft

௡ replacement oil filters are designed for

added engine protection and long life. If a replacement oil filter is used
that does not meet Ford material and design specifications, start-up
engine noises or knock may be experienced.

It is recommended you use the appropriate Motorcraft

௡ oil filter or

another with equivalent performance for your engine application.

Resetting the oil life monitoring system

1. Turn the ignition key to the on position. Do not start the engine.
For vehicles with push-button start, press and hold the START/STOP
button for two seconds without pressing the brake pedal. Do not attempt
to start the engine.

2. Press both the accelerator and brake pedals at the same time.

3. Keep both pedals fully pressed.

4. After three seconds, the Service: Oil reset in prog. message will be
displayed.

5. After 25 seconds, the Service: Oil reset complete message will be
displayed.

6. Release both the accelerator and brake pedals.

7. The Service: Oil reset complete message will no longer be displayed.

8. Rotate the key to the off position.
For vehicles with push-button start, press the START/STOP button to
turn the vehicle off completely.

Maintenance and Specifications

344

2012 Focus (foc)
Owners Guide, 5th Printing
USA
(fus)

Advertising
This manual is related to the following products: