FORD 2012 Focus v.5 - Manual (Page 64)

Pairing subsequent phones
Once you have a phone paired with the system, the steps to pair another
phone is a bit different. To pair a subsequent phone:
Note: To scroll through the menus, press / .
1. Ensure that the vehicle ignition and radio are turned on and that
you are in P (Park).
2. Press PHONE or and scroll until System Settings is selected.
3. Press OK and scroll until Bluetooth Devices is selected and press
OK.
4. Scroll until Add Bluetooth Device is selected and press OK.
5. When Find SYNC appears in the display, press OK.
6. Put your phone into Bluetooth discovery mode. Refer to your
phone’s user guide if necessary.
7. When prompted on your phone’s display, enter the six digit PIN
provided by SYNC in the radio display.
8. The display will indicate when the pairing is successful.
9. The system will then prompt with questions such as if you would
like to set the current phone as the primary phone (the phone
SYNC will automatically try to connect with first upon vehicle
start-up), download your phone book, turn on 911 Assist™ (if
available), etc.
Phone voice commands
Pull and when prompted, say, “Phone”. You may then say any of the
following:
• Call <name> 2 • Call <name> at home 2
• Call <name> on mobile OR cell 2
• Call <name> at work OR Call
<name> in office
2
• Call <name> on other 2 • Dial* 2
• Phone book <name> at home 1 • Phone book <name> 1
• Phone book <name> on mobile
OR cell
1
• Phone book <name> at work OR
Phone book <name> at office
1
• Call history outgoing 1 • Call history incoming 1
Entertainment Systems
64
2012 Focus (foc)
Owners Guide, 5th Printing
USA (fus)