Instrument cluster 19 – FORD 2012 Focus Electric User Manual

Page 19

Advertising
background image

Park lamps

Illuminates when the park lamps are on.

Powertrain malfunction/reduced power (RTT)

Illuminates when a powertrain or high-voltage charge system
fault has been detected. If the indicator stays on or continues
to come on, contact your authorized dealer as soon as possible.

Ready to drive

Illuminates once the vehicle has been switched on and is ready
to drive. A corresponding message may display stating ready to
drive or a message regarding budget if a charge point has not

been entered.

Safety belt

Reminds you to fasten your safety belt. A Belt-Minder

௡ chime

will also sound to remind you to fasten your safety belt.

Speed control (if equipped) (RTT)

Illuminates when the speed control is activated. Turns off when
the speed control system is deactivated.

Stop safely (RTT)

Indicates electrical component fault/failure that will cause the
vehicle to shutdown or enter into a limited operating mode. A
message may also display.

Turn signal

Illuminates when the left or right turn signal or the hazard
warning flasher is turned on. If the indicators stay on or flash
faster, check for a burned out bulb.

Vehicle plugged in (RTT)

Illuminates when the vehicle is plugged in. A corresponding
message may display after attempting to start the vehicle.

Instrument Cluster

19

2012 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising