FORD 2012 Shelby GT 500 v.2 - Manual (Page 100)

Condition Potential Causes
Cannot clear
MyKey
௡
• Key in the ignition is a MyKey௡
• No MyKeys௡ are programmed to the vehicle. Refer
to Create a MyKey
௡ section.
• Vehicle has been started using a remote start
system that is programmed as a MyKey
௡. Refer to
MyKey
௡ with remote start systems section.
Lost the only
admin key
• Purchase a new key from your authorized dealer.
Lost any key
• For programming spare keys, refer to the
Programming spare keys section in this chapter.
I accidentally
programmed all
keys as MyKeys
௡
• Vehicle has a remote start system that is recognized
as an admin key. Refer to the Using MyKey
௡ with
remote start systems section to reset all MyKeys
௡ as
admin keys.
No MyKey
௡
function with
intelligent access
key (push button
start) (if equipped)
• An admin key is present at vehicle start
• No MyKeys௡ are programmed to the vehicle. Refer
to Create a MyKey
௡ section
MyKey
௡
programmed total
includes one
additional key
• Unknown key has been programmed to the vehicle
as a MyKey
௡.
• Vehicle is equipped with a remote start system.
Refer to Using MyKey
௡ with remote start systems
section.
Admin keys
programmed total
includes one
additional key
• Unknown key has been programmed to the vehicle
as admin key.
• Vehicle is equipped with a remote start system.
Refer to Using MyKey
௡ with remote start systems
section.
MyKey
௡ miles do
not accumulate
• MyKey௡ is not being used by the intended user.
• MyKey௡ system has been recently cleared.
Locks and Security
100
2012 05+ Mustang (197)
Owners Guide, 2nd Printing
USA (fus)