Anti-theft indicator, Automatic arming, Automatic disarming – FORD 2012 Shelby GT 500 v.3 User Manual

Page 113: Locks and security

Advertising
background image

Anti-theft indicator

The anti-theft indicator is located in the instrument cluster.
• When the ignition is in the off

position, the indicator will flash
once every two seconds to
indicate the SecuriLock

௡ system is functioning as a theft deterrent.

• When the ignition is in the on position, the indicator will glow for

three seconds, then turn off to indicate normal system functionality.

If a problem occurs with the SecuriLock

௡ system, the indicator will flash

rapidly or glow steadily when the ignition is in the on position. If this
occurs, turn the ignition off then back to on to make sure there was no
electronic interference with the programmed key. If the vehicle doesn’t
start, try to start it with the 2nd programmed key and if successful
contact your authorized dealership for key replacement. If the indicator
still flashes rapidly or glows steadily, the vehicle will not start, contact
your authorized dealer as soon as possible for service.

Automatic arming

The vehicle is armed immediately after switching the ignition to the off
position.

Automatic disarming

Switching the ignition to the on position with a coded key disarms the
vehicle.
• The theft indicator will illuminate for three seconds and then go out.
• If the theft indicator stays on for an extended period of time or

flashes rapidly, contact your authorized dealer as soon as possible.

Replacement of integrated keyhead transmitters (IKT) and coded
keys

Note: Your vehicle comes equipped with two integrated keyhead
transmitters (IKTs). The IKT functions as both a programmed ignition
key that operates all the locks and starts the vehicle, as well as a remote
keyless entry transmitter. A maximum of eight coded keys can be
programmed to your vehicle; only four of these eight keys can be IKTs
with remote entry functionality.

If your IKTs or standard SecuriLock

௡ coded keys are lost or stolen and

you don’t have an extra coded key, you will need to have your vehicle
towed to an authorized dealer. The key codes need to be erased from
your vehicle and new coded keys will need to be programmed.

Locks and Security

113

2012 05+ Mustang (197)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: