Center console, Driver controls – FORD 2012 Shelby GT 500 v.3 User Manual

Page 74

Advertising
background image

2. To calibrate, press and hold the 7
and 9 radio preset buttons together
for approximately 10 seconds until
CAL appears. Release the buttons.

3. Slowly drive the vehicle in a
circle (less than 3 mph [5 km/h])
until the CAL display changes to the
direction value (N, S, E, W, etc.). It
may take up to five circles to
complete calibration.

4. The compass is now calibrated.

CENTER CONSOLE

Your vehicle is equipped with a
variety of console features. These
include:
• Dual cupholders in front of

console (pull door open to
access)

• Lockable storage bin (use ignition

key to lock/unlock the console bin
and press the latch to open the
console)

• Auxiliary power point
• Coin holder slots
• Audio input jack
• USB port (if equipped)

WARNING: Use only soft cups in the cupholder. Hard objects
can injure you in a collision.

Driver Controls

74

2012 05+ Mustang (197)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: