Turn signal control, Lights – FORD 2012 Shelby GT 500 v.3 User Manual

Page 61

Advertising
background image

4. Locate the vertical adjuster on each headlamp.
• Halogen headlamp (1)
• HID headlamp (2)
5. Then use a 7 mm Allen wrench or a Phillips screwdriver to adjust the
headlamp up or down. HORIZONTAL AIM IS NOT REQUIRED FOR THIS
VEHICLE AND IS NON-ADJUSTABLE.

6. Close the hood and turn off the lamps.

TURN SIGNAL CONTROL
• Push down to activate the left

turn signal.

• Push up to activate the right turn

signal.

The flash rate of the turn signal indicator will speed up considerably if
any of the turn signal lamps are out.

Note: For sequential rear turn signal lamps, an outage of the inner most
of the three compartments will result in this rapid flash rate.

Lights

61

2012 05+ Mustang (197)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: