FORD 2011 Edge v.1 - Manual (Page 52)

• To save a channel as a preset, acquire the desired channel and then
press and hold the desired memory preset (0–9). A pop-up screen will
confirm when it is saved
• To view your presets, press
/ / for a list of your saved
presets. The display will indicate the preset # that to which the station
was saved.
• Select the ‘Replay’ soft key to replay audio on the current channel.
You can replay approximately 45 minutes of audio as long as you have
remained tuned to the current station. If you change stations, the
previous audio will be erased. While in replay mode, you can:
• Press and release
/ to advance to the previous /next
song .
• Press and hold
/ to advance to reverse or fast forward
in the current track.
• Press
/ to play / pause the audio.
• Select ‘Exit & Play Live’ to return to live audio if you had been
using the replay feature to replay audio.
Audio settings
To make adjustments to the sound settings, press MENU > Audio
Settings to access:
• SCV: Scroll to select Speed Compensated Volume (SCV) and press OK
to enter the menu. This feature automatically adjusts the system’s
volume to compensate for speed and wind noise. You can set the
system between off and +7. Press OK to confirm and close.
• Sound: Press OK to enter and scroll using the center control to select
from Treble, Bass, Middle, Balance, Fade. When the desired one is
chosen, press > to enter. Use the center controls to make adjustments
and press OK to confirm and close.
• DSP Occupancy (if equipped): Press > to enter and press scroll to
select from Optimize all, Optimize Driver or Optimize Rear. When the
desired selection is selected, press OK to confirm. Occupancy mode
optimizes sound quality for the chosen seating position.
• DSP Equalizer (if equipped): Press > to enter and select from
Stereo or Surround sound.
Entertainment Systems
52
2011 Edge (edg)
Owners Guide, 1st Printing
USA (fus)