Positive retention floor mat, Liftgate, Driver controls – FORD 2011 Escape v.2 User Manual

Page 86

Advertising
background image

POSITIVE RETENTION FLOOR MAT

WARNING: Do not install additional floor mats on top of the
factory installed floor mats as they may interfere with the

accelerator or the brake pedals.

Position the floor mat so that the
eyelet is over the retention post and
press down to lock in. Make sure
that the mat does not interfere with
the operation of the accelerator or
the brake pedal. To remove the floor
mat, reverse the installation
procedure.

LIFTGATE
• To open the liftgate window,

unlock the liftgate (with the
power door locks or the remote
entry) and press the right side
control button located under the
license plate lamp shield.

• To open the liftgate, unlock the

liftgate (with the power door
locks or the remote entry) and
press the middle control button
within the pull handle, located
below the license plate.

To lock the liftgate and the liftgate window, use the power door locks.

Do not open the liftgate or liftgate window in a garage or other enclosed
area with a low ceiling. If the liftgate window is raised and the liftgate is
also opened, both liftgate and window could be damaged against a low
ceiling.

Do not leave the liftgate or liftgate window open while driving. Doing so
could cause serious damage to the liftgate and its components as well as
allowing carbon monoxide to enter the vehicle.

Driver Controls

86

2011 Escape (204)
Owners Guide, 2nd Printing
USA
(fus)

Advertising