Locks and security – FORD 2011 Escape v.4 User Manual
Page 95
![background image](/manuals/602134/95/background.png)
Status menus will include the remote start system as an additional key in
the total count. See the Check MyKey
System Status section.
Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys
, in which case, you will
need to use your remote start system to reset all MyKeys
as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey
section.
Troubleshooting
Condition
Potential Causes
Can’t create a MyKey
• Key in the ignition is already a
MyKey
• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key)
• SecuriLock Passive Anti-Theft
System is disabled or in unlimited
mode
• Vehicle has been started using a
remote start system that is
programmed as MyKey
. Refer to
Using MyKey
with Remote Start
Systems section.
Cannot program the MyKey
optional settings
• Key in the ignition is a MyKey
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section
• Vehicle has been started using a
remote start system that is
programmed as MyKey
. Refer to
Using MyKey
with Remote Start
Systems section.
Locks and Security
95
2011 Escape (204)
Owners Guide, 4th Printing
USA (fus)