FORD 2011 Escape Hybrid v.2 - Manual (Page 99)

3. Follow Steps 1-4 in the Create a MyKey™ section.
Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or
ADMIN KEYS PROGRAMMED that is displayed in the MyKey™ system
status menus will include the remote start system as an additional key in
the total count. See the Check MyKey™ system status section.
Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys™, in which case, you will
need to use your remote start system to reset all MyKeys™ as admin
keys by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey™ section.
Troubleshooting
Condition Potential Causes
Can’t create a MyKey™
• Key in the ignition is already a MyKey™
• Key in the ignition is the last remaining
admin key (there always has to be at least
one admin key)
• SecuriLock௡ passive anti-theft system is
disabled or in unlimited mode
• Vehicle has been started using a remote
start system that is programmed as MyKey™.
Refer to Using MyKey™ with remote start
systems section.
Cannot program the
MyKey™ optional
settings
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™ section
• Vehicle has been started using a remote
start system that is programmed as MyKey™.
Refer to Using MyKey™ with remote start
systems section.
Locks and Security
99
2011 Escape Hybrid (ehv)
Owners Guide, 2nd Printing
USA (fus)