Security override, Window lock, Accessory delay – FORD 2011 Explorer v.2 User Manual

Page 99: Interior mirror, Mirrors, Driver controls

Advertising
background image

Security override
To override a bounce-back condition, within two seconds after the
window reaches the bounce-back position, pull and hold the switch up
and the window will travel up with no bounce-back or pinch
protection.
If the switch is released before the window is fully closed,
the window will stop. For example, this can be used to overcome the
resistance of ice on the window or seals.

Window lock

The window lock feature allows only
the driver and front passenger to
operate the power windows.

Press the control to lock out all
window controls (except the driver’s
and front passenger’s). Press it
again to restore the window
controls.

Accessory delay
With accessory delay, the audio system, power windows and moon roof
(if equipped) operate for up to 10 minutes after the ignition is turned off
or until either front door is opened.

INTERIOR MIRROR
The interior rear view mirror has two pivot points on the support arm
which lets you adjust the mirror up or down and from side to side.

WARNING: Do not adjust the mirror while the vehicle is in
motion.

Automatic dimming interior rear view mirror (if equipped)
The interior rear view mirror has an auto-dimming function. The
electronic day/night mirror will change from the normal (high reflective)
state to the non-glare (darkened) state when bright lights (glare) reach
the mirror. When the mirror detects bright light from behind the vehicle,
it will automatically adjust (darken) to minimize glare.
The mirror will automatically return to the normal state whenever the
vehicle is placed in R (Reverse) to ensure a bright clear view when
backing up.
Do not block the sensors on the front and back of the interior
rear view mirror since this may impair proper mirror
performance.

Driver Controls

99

2011 Explorer (exp)
Owners Guide, 3rd Printing
USA
(fus)

Advertising