Driving – FORD 2011 F-550 v.4 User Manual

Page 283

Advertising
background image

5. Remove the top half of the shroud.

6. Remove the three fasteners under
the column that secure the lower
shroud half to the column.

7. Pull the lock lever into the full
unlocked position and remove the
lower shroud cover by pulling the
lever handle through the slot in the
cover.

8. Apply the brake and move the gearshift lever into N (Neutral).
9. Start the vehicle.
Perform Steps 4 through 8 in reverse order, making sure to engage the
hinge pivots between the upper and lower halves of the shroud. Keep
slight pressure in the forward direction as the halves are rotated
together.

WARNING: Do not drive your vehicle until you verify that the
brake lamps are working.

WARNING: Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be

working properly. See your authorized dealer as soon as possible.

Driving

283

2011 F-250/350/450/550 (f23)
Owners Guide, 4th Printing
USA
(fus)

Advertising
This manual is related to the following products: