Increasing speed while using speed control, Reducing speed while using speed control, Turning off speed control – FORD 2011 Fiesta v.3 User Manual

Page 129: Steering wheel controls (if equipped), Sync system hands free control feature, Driver controls

Advertising
background image

Increasing speed while using speed control
To increase the set speed:
• Press and hold SET+ until you get to the desired speed, then release.

You can also use SET+ to operate the tap-up function. Press and
release SET+ to increase the vehicle set speed in 1 mph (1.6 km/h)
increments.

• Use the accelerator pedal to get to the desired speed then press and

release SET+.

Reducing speed while using speed control
To reduce the set speed:
• Press and hold SET– until you get to the desired speed, then release.

You can also use SET– to operate the tap-down function. Press and
release SET– to decrease the vehicle set speed in 1 mph (1.6 km/h)
increments.

• Press the brake pedal or the clutch pedal (if equipped) until the

desired vehicle speed is reached then press SET+.

Turning off speed control
To turn off the speed control, press OFF or turn off the ignition.
Note: When you turn off the speed control or the ignition, your speed
control set speed memory is erased.

STEERING WHEEL CONTROLS (IF EQUIPPED)

SYNC

system hands free control feature

Press

(located on the

multi-function lever) briefly to use
the voice command feature. You will
hear a tone and LISTENING will
appear in the radio display. Press
and hold

to exit voice command.

Press

to activate phone mode or answer a phone call. Press and

hold

to end a call or exit phone mode.

Press

to scroll through various menus and selections. Press

OK to confirm your selection.

When SYNC

௡ is not in use, press and release

to select the

previous or next radio station preset, CD track or satellite preset (if
equipped). Press and hold to move forward or backward to a desired
frequency.

Driver Controls

129

2011 Fiesta (fie)
Owners Guide, 3rd Printing
USA
(fus)

Advertising