FORD 2011 Flex v.2 - Manual (Page 164)

The third row power seat buttons are located behind the third row seats
on the left-hand quarter trim panel.
Note: The power fold seats work only when the vehicle is in P (Park)
and the tailgate is open. If the ignition is in the off position and the
feature is still running, the battery saver will turn it off after 10 minutes.
You can reactivate the power seats by pressing
on the remote entry
key fob or by using the unlock procedure on the keyless entry keypad.
Refer to SecuriCode™ keyless entry system in the Locks and Security
chapter. Keeping the key in accessory or run positions will prevent the
feature from timing out.
Press the seat selection button (4) to select either right-hand seat, the
left-hand seat or both. First select the seat you would like to adjust, then
select one of the following:
• Press the NORMAL button (1) to return the seat to the normal
seating position.
• Press the STOW button (2) to stow the seat into the tub floor.
• Press the FOLD button (3) (the top portion of the button) to fold
down the seatback.
• Press the TAILGATE button (3) (the bottom portion of the button) to
put the seat into the tailgate position.
Note: Pressing a different button while the power seat feature is already
being performed may cause the first selected seat movement to be
cancelled. Allow the first seat movement to be completed before pressing
a button for another function.
Note: Ensure that there are no objects such as books, purses or brief
cases on the load floor before unstowing the seat. Failure to remove all
objects from the top of the load floor prior to unstowing it may cause
damage to the seat.
1 2 3 4
NORMAL STOW
RH
BOTH
LH
FOLD
TAILGATE
Seating and Safety Restraints
164
2011 Flex (471)
Owners Guide, 2nd Printing
USA (fus)