Plastic (non-painted) exterior parts, Windows and wiper blades, Cleaning – FORD 2011 Focus v.1 User Manual

Page 221

Advertising
background image

• Do not spray a hot engine with cold water to avoid cracking the

engine block or other engine components.

• Spray Motorcraft௡ Engine Shampoo and Degreaser (ZC-20) on all

parts that require cleaning and pressure rinse clean. In Canada, use
Motorcraft

௡ Engine Shampoo (CXC-66-A).

• Never wash or rinse the engine while it is hot or running; water in the

running engine may cause internal damage.

• Never wash or rinse any ignition coil, spark plug wire or spark plug

well, or the area in and around these locations.

• Cover the highlighted areas to prevent water damage when cleaning

the engine.

PLASTIC (NON-PAINTED) EXTERIOR PARTS

Use only approved products to clean plastic parts. These products are
available from your authorized dealer.
• For routine cleaning, use Motorcraft௡ Detail Wash (ZC-3-A).
• If tar or grease spots are present, use Motorcraft௡ Bug and Tar

Remover (ZC-42).

WINDOWS AND WIPER BLADES

The windshield, rear and side windows and the wiper blades should be
cleaned regularly. If the wipers do not wipe properly, substances on the
vehicle’s glass or the wiper blades may be the cause. These may include
hot wax treatments used by commercial car washes, water repellent
coatings, tree sap, or other organic contamination; these contaminants

Cleaning

221

2011 Focus (foc)
Owners Guide, 1st Printing
USA
(fus)

Advertising