FORD 2011 Fusion v.2 - Manual (Page 102)

Note: For all vehicles with remote start installed, it is possible to
program all ’real’ keys as MyKeys™, in which case, you will need to use
your remote start system to reset all MyKeys™ as admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey™ section.
Troubleshooting
Condition Potential Causes
Can’t create a MyKey™
• Key in the ignition is already a MyKey™.
• Key in the ignition is the last remaining
admin key (there always has to be at least
one admin key).
•SecuriLock௡ Passive Anti-Theft System is
disabled or in unlimited mode
• Vehicle has been started using a remote
start system that is programmed as MyKey™.
Refer to Using MyKey™ with remote start
systems section.
Cannot program the
MyKey™ optional
settings
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™ section
• Vehicle has been started using a remote
start system that is programmed as a
MyKey™. Refer to Using MyKey™ with
remote start systems section.
Cannot clear MyKey™
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™ section
• Vehicle has been started using a remote
start system that is programmed as a
MyKey™. Refer to MyKey™ with remote
start systems section.
Lost the only admin key
• Purchase a new key from your authorized
dealer
Lost any key
• For programming spare keys, refer to the
Programming spare keys section in this
chapter.
Locks and Security
102
2011 Fusion (fsn)
Owners Guide, 2nd Printing
USA (fus)