One-touch up or down (front windows only), Global open windows, Bounce-back – FORD 2011 Fusion Hybrid v.1 User Manual

Page 93: Driver controls

Advertising
background image

Press and pull the window switches
to open and close windows.
• Press down (to the first detent)

and hold the switch to open.

• Pull up (to the first detent) and

hold the switch to close.

Rear Window Buffeting: When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise. This
noise can be alleviated by lowering a front window approximately
2–3 inches (5–8 cm).

One-touch up or down (front windows only)

This feature allows the driver or passenger’s window to open or close
fully without holding the control down.

To operate one-touch down, press the switch completely down to the
second detent and release quickly. The window will open fully.
Momentarily press the switch to any position to stop the window
operation.

To operate one-touch up, pull the switch completely up to the second
detent and release quickly. The window will close fully. Momentarily
press the switch to any position to stop the window operation.

Global open windows

Press and hold

on the remote transmitter to begin opening the two

front windows and (if equipped) vent the moon roof.
• The

control can then be released and the windows will complete

the opening operation and fully vent the moon roof.

• If

or

is pressed during the opening operation, both windows

and moon roof movement will stop.

Note: The ignition must be in the off position and the accessory delay
feature must not be activated in order for this feature to operate.

Note: To disable this feature, contact your authorized dealer.

Bounce-back

When an obstacle has been detected in the window opening as the
window is moving upward, the window will automatically reverse
direction and move down. This is known as “bounce-back”. If the ignition

Driver Controls

93

2011 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA
(fus)

Advertising