FORD 2011 Fusion Hybrid v.2 - Manual (Page 113)

Refer to Message center in the Instrument Cluster chapter for MyKey
௡
system warnings displays.
Using MyKey
௡ with remote start systems
MyKey
௡ is not compatible with non-Ford approved aftermarket remote
start systems. If you choose to install a remote start system please see
your authorized dealer for a Ford approved remote start system.
When using a Ford-approved remote start system, the default settings
will recognize the remote start system as an additional admin key with
its associated privileges. Program the remote start system as a MyKey
௡
in addition to the key that has already been programmed as a MyKey
௡.
To program the remote start system as MyKey
௡, do the following:
1. Enter the vehicle and close all doors.
2. Remote start the vehicle using a remote start fob.
3. Follow the steps in the Create a MyKey
௡ section.
Note: For all vehicles, the number of MyKeys programmed or keys
programmed that are displayed in the MyKey
௡ system status will include
the remote start system as an additional key in the total count. See the
Check MyKey
௡ system status section.
Note: For all vehicles with remote start installed, it is possible to
program all ’real’ keys as MyKeys
௡, in which case, you will need to use
your remote start system to reset all MyKeys
௡ as admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow the steps in the Clear MyKey
௡ section.
Locks and Security
113
2011 Fusion Hybrid (hfv)
Owners Guide, 2nd Printing
USA (fus)