Using the right bulbs, Lights – FORD 2011 Mustang v.1 User Manual

Page 62

Advertising
background image

Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens
Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of

the lens

Take your vehicle to a dealer for service if any of the above conditions of
unacceptable moisture are present.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.

Function

Trade Number

Headlamp (halogen)

H13

* HID (high intensity discharge) headlamp
(if equipped)

D3S

Front park lamp, turn lamp (halogen)

3457 or 3457K

Front park, turn lamp (HID)

3457AK (amber)

Sidemarker (front/rear)

194

Fog lamp

9145–GT or H11–Pony

(if equipped)

Tail lamp, brake lamp, turn lamp (LED)

L1230R-3N and

L3230R-4CX

* High-mount stoplamp (LED)

Non-replaceable LEDs

Backup lamp

912

License plate lamp

C5WL

All replacement bulbs are clear in color except where noted.

To replace all instrument panel lights - see your authorized dealer.

* To replace these lamps - see your authorized dealer.

Lights

62

2011 05+ Mustang (197)
Owners Guide, 1st Printing
USA
(fus)

Advertising